Special Products

SAL114x220

The SAL114x220 is a special fork designed by following specific requests of one of the Eurofork customers.

Thanks to their dimensions (114 mm wide and 220 mm high) the mobile parts of this fork are particularly suitable to be introduced into narrow spaces in the shelves.

DD MEDIUM

The DD MEDIUM fork has a close relation with the DD MAXI forks, indeed it is a double deep fork quite large and thin. The slides are 350 mm wide and their total thickness is equal to only 120 mm.

The minimum length of this fork is about 1500 mm and it can handle up to 1500 kg. As usual this value is influenced by the stroke/length ratio, so it could be increased in case of a favorable ratio.

DD MAXI

The DDmaxi is a special double deep fork that could handle up to 2000 kg on a single fork.

This fork could be used for several applications but often it is used as mono-fork thanks to the mobile parts dimensions that have a width of 620 mm and an height of only 140 mm high.

COIL FORKS

 

The coil forks are normal forks with some technical solution that allow the handling of coils with different diameters.

Sometimes it is necessary to design reinforced forks for very heavy coils.

BR4

The BR4 is a special fork with four slides, one more than the double deep forks.

Thanks to this feature, the BR4 is used when high ratio between stroke and fork length are requested or when smaller deflection are necessary with a normal double deep ratio.

Subscribe to Special Products

Powered by 3ding Consulting | Tutti i marchi registrati® utilizzati in questo sito appartengono ai loro legittimi proprietari | Website info