SA250x110 - SA250x130

The forks belonging to the family SA250 are a further performance step compared to the previous model (SA200).

As per SA200 model, the increased size and inertia of moving parts allows the transport of loads up to 3500 kg per set (one set is composed by 2 forks).

The SA250x110 slides are 250 mm wide and 110 mm high.

The SA250x130 slides are 250 mm wide and 130 mm high.

The SA250 is used in iron and steel industry (coils) and for the handling of automobile molds.

The typical sized of this family are: 250 mm in width of the upper sliding and 110/130 mm in overall height of the mobile parts.

	L [mm]	USL [mm]	S [mm]	S max [mm]	USW [mm]	Load example for Deflection [kg]	Deflection H=110 [mm]	Deflection H=130 [mm]
	L [mm]	USL [mm]	S [mm]	S max [mm]	USW [mm]	Load example for Deflection [kg]	Deflection H=110 [mm]	Deflection H=130 [mm]
Standard length	1200*	up to 1200	1325	1650	250	2500	6	4
	1250	up to 1250	1375	1750	250	2500	7	4
	1300	up to 1300	1425	1800	250	2500	7	5
	1350	up to 1350	1475	1850	250	2500	8	5
	1400	up to 1400	1550	1950	250	2500	10	6
	1450	up to 1450	1600	2000	250	2500	11	6
	1600	up to 1600	1750	2200	250	2500	14	8
	1800	up to 1800	1900	2500	250	2500	17	9
	2100	up to 2100	2250	2900	250	2500	28	15
	2400	up to 2400	2600	3350	250	2000	35	19
	3200	up to 3200	3400	4450	250	1000	45	25
	3500*	up to 3500	3600	4800	250	1000	52	29

The length L and the strokes S in the table are examples: each fork can be customized following the customer needs

The deflection examples refers to the stroke S and to load Q

All values stated are indicative. Specific applications have to be evaluated by Eurofork Technical Department. If your request is not included in the above table please contact Eurofork.