S Type Miniload

The forks for miniload S type are used for the handling of small loading units, such as plastic boxes or cardboard with a maximum weight of 150 kg. Two models are available in single deep: S34 and S40. Eurofork, for this type of fork, produces also two versions in double deep: S60 e S80. These forks can be distinguished from HAM model for its reduced vertical dimension (34/40 mm in single deep and 60/80 mm double deep). Among the advantages of these products arise extremely reduced cycle times and a lower noise during operation, this is thanks to the use of belt transmissions.

Fork length* [mm]	Upper Slide Length [mm]	Stroke Example [mm]	Upper Slide Width [mm ]	Slides Height [mm]		SD Deflection for Q=100 kg [mm]
S34/S40	S34/S40	S34/S40	S34/S40	S34	S40	S34	S40
700	up to 700	800	200	34	40	6	5
1100	up to 1100	1200	200	34	40	15	12
1500	up to 1500	1600	200	34	40	33	27

The length L and the strokes S in the table are examples: can have a length between 700 mm and the maximum value (1500 mm)

The deflection examples refers to the stroke S and to load Q

All values stated are indicative. Specific applications have to be evaluated by Eurofork Technical Department. If your request is not included in the above table please contact Eurofork.